Voltus Energy Solutions is a New Jersey licensed electrical contractor, and Berkeley Heights is a classic mid-century township. Close to 60 percent of its homes are 1940s to 60s Capes, ranches, and split-levels, with newer Colonials layered in and only a small share built before 1940. These homes were built solid, but many still run on original 100-amp, or even 60-amp, service and aging panels that were never meant for today’s loads. We upgrade them cleanly, without damaging your finishes.
Whether your Berkeley Heights home needs a 200-amp service upgrade, aluminum branch wiring corrected, an EV charger, or a full rewire, we bring it up to safe, modern, code-compliant standards.
What we do most often in Berkeley Heights
- Electrical panel and service upgrades: bringing original 60- and 100-amp services up to modern 200-amp capacity. See how many amps your home needs.
- Aluminum wiring correction: a real concern in some 1960s and 70s homes here.
- Rewiring: for split-levels and ranches with dated or ungrounded circuits.
- EV charger installation: Level 2 chargers in the garages these homes were built with.
- Dedicated circuits and addition wiring for finished basements, modern kitchens, and expansions.
Mid-century homes, modern loads
A 1958 Berkeley Heights ranch or split-level was never wired for central air, an EV, a finished basement, and today’s kitchen at once. Most of our work here closes that gap safely with a right-sized 200-amp service, grounded circuits, and clean, permitted wiring. Buying one of these homes? Our pre-purchase electrical inspection tells you what it will take to bring it current.
Permits and inspections in Berkeley Heights
Electrical work in Berkeley Heights falls under New Jersey’s Uniform Construction Code and is permitted through the Township’s Building Department at the Municipal Complex, 29 Park Avenue. As your licensed contractor, we pull the electrical permit, schedule the inspection, and carry the work to sign-off. NJ Electrical Contractor License #34EI01906000, fully insured.
Frequently asked questions
My Berkeley Heights split-level still has its original panel. Should I upgrade?
If it is a 60- or 100-amp panel or a brand known for problems, it is worth evaluating, especially before you add an EV charger, central air, or a basement. A 200-amp upgrade is the usual fix and is often required to pass inspection.
Is aluminum wiring a problem in my home?
It can be. Aluminum branch wiring from the 1960s and 70s loosens and overheats at connections. We assess and remediate it properly. More on the risks here.
Can you wire a finished basement or an addition?
Yes. We handle the circuits, lighting, and any service upgrade the project needs, permitted and inspected.
Do you pull the Berkeley Heights permit?
Yes. We file the electrical permit through the Township Building Department and schedule the required inspections.
Serving Berkeley Heights and nearby towns
Voltus proudly serves Berkeley Heights and the surrounding communities, including Summit, Chatham, Madison, and Short Hills. See all our service areas.
Upgrading, adding on, or chasing a wiring problem?
Call Voltus at (973) 382-9995 for a Berkeley Heights electrical assessment, or request service online. We answer, take down the details, and can escalate real emergencies right away.
Electrical services we offer in Berkeley Heights
Panel upgrades and replacement, EV charger installation, backup power, rewiring and system design, ceiling fan installation, troubleshooting and repair, landscape and outdoor lighting, whole-home surge protection, and 24/7 emergency service.
Standby and home generators in Berkeley Heights
Berkeley Heights sees its share of storm-related outages, and whole-house standby generators are a common request here. The electrical side of a generator installation is the part that determines whether it works properly when you need it.
What the job involves: a transfer switch, either automatic or manual, that isolates your home from the utility so you cannot backfeed the grid, a dedicated circuit set for the loads you want covered, and correct sizing against the actual load rather than a guess.
The decision most people face is whole-house versus essential-circuits. A smaller generator covering heat, refrigeration, well pump, sump pump and some lighting costs considerably less than a whole-house unit and covers what actually matters in an outage. We will size both and let you compare.
Portable generator owners: a proper inlet and interlock or transfer switch is the safe way to connect one. Running extension cords through a window, or worse backfeeding through a dryer outlet, is genuinely dangerous to you and to line workers.